General specifications |
|---|
Signal type | Analog output |
Functional safety related parameters |
|---|
Safety Integrity Level (SIL) | SIL 2 |
Systematic capability (SC) | SC 3 |
Supply |
|---|
Connection | Power Rail or terminals 9+, 10- |
Rated voltage | 19 ... 30 V DC |
Ripple | ≤ 10 % |
Rated current | ≤ 30 mA at 24 V |
Power dissipation | ≤ 600 mW at 20 mA and 500 Ω load |
Power consumption | ≤ 700 mW |
Input |
|---|
Connection side | control side |
Connection | terminals 5-, 6+ |
Input signal | 4 ... 20 mA , limited to approx. 26 mA |
Input voltage | open loop voltage of the control system < 30 V |
Voltage drop | approx. 6 V at 20 mA |
Input resistance | > 100 kΩ, with field wiring open |
Output |
|---|
Connection side | field side |
Connection | terminals 1+, 2- |
Voltage | ≥ 13 V at 20 mA |
Current | 4 ... 20 mA |
Load | 0 ... 650 Ω |
Ripple | 20 mV rms |
Transfer characteristics |
|---|
Deviation | at 20 °C (68 °F), 4 ... 20 mA
< 0.1 % of full scale, incl. non-linearity and hysteresis |
| Influence of ambient temperature | < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ...
-20 °C (-40 ... -4 °F)) |
Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0
... 3 kHz (-3 dB)
control side into the field side: bandwidth with 0.5 Vpp signal 0
... 3 kHz (-3 dB) |
Rise time | 10 to 90 % ≤ 10 ms |
Galvanic isolation |
|---|
Input/Output | basic insulation according to IEC/EN 61010-1, rated insulation
voltage 300 Veff |
Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation
voltage 300 Veff |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation
voltage 300 Veff |
Indicators/settings |
|---|
Display elements | LED |
Labeling | space for labeling at the front |
Directive conformity |
|---|
Electromagnetic compatibility |
|
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Conformity |
|---|
Electromagnetic compatibility | NE 21:2017
EN 61326-3-2:2018 |
Degree of protection | IEC 60529 |
Protection against electrical shock | UL 61010-1:2019 |
Ambient conditions |
|---|
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
|---|
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 100 g |
Dimensions | 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing
type A2 |
| Height | 124 mm |
| Width | 12.5 mm |
| Depth | 114 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas |
|---|
EU-type examination certificate | CESI 06 ATEX 021 X |
| Marking |  II (1)G [Ex ia Ga] IIC
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I
|
| Output | Ex ia |
Supply |
|
| Maximum safe voltage | 250 V AC (Attention! Um is no rated voltage.) |
Equipment | terminals 1+, 2- |
| Voltage | 25.2 V |
| Current | 100 mA |
| Power | 630 mW |
| Internal capacitance | 5.7 nF |
| Internal inductance | negligible |
Certificate | CESI 19 ATEX 021 X |
| Marking | II 3G Ex ec IIC T4 Gc |
Galvanic isolation |
|
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak
value 375 V |
| Output/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak
value 375 V |
Directive conformity |
|
| Directive 2014/34/EU | EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC
60079-7:2015+A1:2018 |
International approvals |
|---|
FM approval |
|
| FM certificate | FM 18 CA 0116 X , FM 19 US 0117 X |
| Control drawing | 116-0469 (cFMus) |
UL approval | E106378 |
| Control drawing | 116-0459 (cULus) |
IECEx approval |
|
| IECEx certificate | IECEx CES 06.0001X |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex ec IIC T4 Gc |
